**POSTPONED UNTIL JAN 12** Complete Super Clean Manufacturing Business Liquidation Auction

DUE TO WEATHER CONDITIONS, THE AUCTION WILL BE POSTPONED TO TUESDAY, JANUARY 12, 2010 AT 10:00 AM. IF YOU HAVE ANY QUESTIONS PLEASE CONTACT THE AUCTION COMPANY.  THANKS
Office - 402-727-8800

COMPLETE SUPER CLEAN MANUFACTURING BUSINESS LIQUIDATION AUCTION

TUESDAY, JANUARY 12, 2010 10:00 AM
LINCOLN, NE: 1421 Kingbird Rd

Can’t Make it to the Auction, Bid Live at Proxibid.com.
Click here to bid online

For Additional Photos Click on the "Photo Galleries" Link on the top right of the page, then wait for "Eley Manufacturing Auction Photo Gallery" to pop up. Click on that & the photos will be shown below.

INDUSTRIAL AUTOMATED POWDER COAT PAINTING SYSTEM:

1996 RAPID Engineering, Inc. Industrial Automated Powder Coat Painting Booth System, 3-Stage Washer System (Clean/Iron Phosphate, Rinse & Rinse/Sealer), (1) 15 HP Pump & (2) 7.5 HP Pumps, 1,500,000 BTU Tank Heat, (3) Stainless Steel Tanks, (Washer Dimensions – 8’0” W x 13’0” H x 35’0” L), Dry-off Oven (6’0” W x 10’0” H x 28’6” L), 20 HP Electric Motor, 7 min. Dry Cycle, 4 fpm Conveyor Speed, 550,000 BTU Burner, 17 min. Purge Time, Cure Oven (9’0” W x 10’0” H x 66’10”L), 10 HP Electric Motor, 22 min. Cure Cycle, 4 fpm Conveyor Speed, 100lb. per Hour Powder Loading, 880,000 BTU Burner, 29 min. Purge Time, (2) Deimco, Inc. Model MD8200-5107-OA-1M Powder Collection Enclosure Booths, Manual Gema Guns, 100 lb. Stainless Steel Hoppers w/Low Level Powder Feed Wells, Gema Box Feed Unit w/Gun & Power Supply, J.B. Webb Unibilt Enclosed Track Conveyor System, Approx. 370’ Length, Ball Bearing Trolleys, 1 HP Electric Motor, Cat Drive @ 2fpm Min. & 6 fpm Max., (3) Emergency Stop Stations, Air Operated w/Air Dryer, Several Control Panels & etc (Sold as a Complete Package – Over $ 500,000.00 Cost when New).

ROBOTIC WIRE FEED WELDER:

1996 Matsushita Pana Robo Model AW-005C CNC Robotic Wire Feed Welder, Model YA-1CCR51 Controller Panel with Wire Remote, Emergency Shut-Off, Heavy Duty Casters, 3-Phase, 25KBA, Exhaust System with Filter Housing, Air-Seal, 1,000lb Spool Platform, Lighted Hood, Curtain Sides, Torch Coolant System, (30) Fixture/Pattern Carts.

OVERHEAD BRIDGE CRANE: 

Abell-Howe 5-Ton Overhead Bridge Crane, 30’ Span, 160’ of Rail, 2 Cable Lift, Hand Remote Control, 4,000lb Spreader Bar.

HYDRAULIC PRESS BRAKE:

Guifil Model PE20-63 Hydraulic Press Brake, SN# 228.00312, 69.3 Ton, 3,937” Stroke, 3,410lbs. Pressure, Empty Weight 7,600lbs, Bending Chart, Emergency Shut-Off Switch, 63” Bending Width, Multiple Dies.

INDUSTRIAL CLEANING FURNACE:

“Tall Boy” Controlled Pyrolysis Model PTR112T4158 Industrial Cleaning Furnace, Model JS-1 Diagnostic Panel, Natural Gas Fired, 350,000 BTU.

HYDRAULIC BENDERS:

Bend-Pak Incorporated Hydraulic Industrial Bender, 180° Foot Controlled Bending Dies, 5HP Baldor Electric Motor.
Richards Multi-Form Hydraulic Bender, SN# 369BB-B, (12) Various Dies, on 4-Wheel Heavy Duty Cart.

INDUSTRIAL LATHE & TOOLING:
 
1999 Acra Model 1440V Industrial Gap-Bend Lathe, SN# 2201T, Acu-Rite Digital Control, Digital Readout, Low & High Settings, Aloris Tool Post, 3-Draw Chuck, Foot Control, Filings Drawer.
(34) Cle-line Heavy Duty Industrial Steel Drill Bits with Case; Complete Te-Co Industrial Steel Clamp Set for Lathes; Several Kenn Metal Industrial Steel Cutters; Starett #657 Magnetic Tool Post for Lathes; Starett Gauge; HHT 4-Jaw Chuck.

VERTICAL MILL & TOOLING:
 
Acra Model AM-25 Vertical Mill, 3 HP Electric Motor, 3-Phase, NS# 00073, Acu-Rite Digital Control, 4’ Floating Table.
(76) Piece Steel Collette Set for Vertical & Horizontal Mills with Display Rack.
ATS Workholding Quick Change Collette Holder; Heavy Duty Vise Clamp for Vertical Mill with Indexing Base; Bridgeport “Criterion” Adjustable Heavy Duty Boring Bar for Vertical Mills; Lavallee & Ide 14 Piece Reamer Set; Jacobs Drill Bit Chuck for Vertical Mills; Collette Collar for Vertical mills; Jacobs Speed Chuck; Adapter for Vertical Mill to Lathe.
Phase II Horizontal Rotary Table, 2-Axis Tilting Table, 90° One Axis, 360° Rotary

ROLLING & CURVING MACHINE: 

Di-Acro Model A-1835 K-Prene Rolling & Curving Machine, SN# 49104731, 4” & 6” Diameter Rollers, Feeding Table, Foot Control, Reel Holder Attachment, 4-Wheel Heavy Duty Cart.

HYDRAULIC SWAGING MACHINE:

2003 Finn-Power Model P20VS Portable Hydraulic Swaging Machine, SN# 11-P20VS-73303, 3HP Electric Motor, Swaging Control Panel, Semi-Automatic, 3”x16A, Swaging Force, 1,370kN, (2) Dies, On Heavy Duty 4-Wheel Cart.

INDUSTRIAL METAL SANDER:

Timesavor Speedbelt Sander, Model 137 M-HL, SN# 9525, 36” Belt Capacity, Setup for Metal, (6) Belts (5-New, 1-Used), Hammons Roto Finish, Model DK4 Cyclone DusKollector (Sander has 20HP Electric Motor, 3-Phase, Heavy Duty 4-Wheel Casters).

Jet Industrial Pedestal Belt Sander.

WELDERS:

(2) Miller Model XMT 304CC/CV, DC Inverter Arc Welder with Auto-Link, Miller 60 Series 24V Wire Feeder Attachment, Tweco Mig Gun, Wire Spool Holder Attachment, Heavy Duty 4-Wheel Cart.

Brand New Miller Model XMT 304CC/CV DC Inverter Arc Welder with Auto-Link, Miller 60 Series 24V Wire Feeder Attachment, Tweco Mig Gun.

SCISSOR LIFT: 

Up-Right Model XL-19 Electric Scissor Lift, Model #63500, SN# 6367, Platform Height 19’, Max Weight 550lbs, Upper & Lower Controls, On Board Charger, Extendable Platform.

FOLKLIFT & ATTACHMENT:

Yale Model GLP040 LPG Forklift, SN# N548882, ROPS, LP Gas Engine with Electric Start, 4,000lb Capacity, 189” 3-Stage Mast with Hydraulic Side Shift, Solid Neumatic Tires, 6,567 Actual Hours. **The Forklift will be Reserved for Loadoat until Friday, January 15, 2010 5:00PM**

Brudi Model 670 Hydraulic Pallet Slide Attachment for Forklifts, SN# 8703777.
Jesco Model 211301 ¼ Yard Cubic Capacity Forklift Dump Cart, 5,000lb Capacity.

INDUSTRIAL STATIONARY AIR COMPRESSORS & COMPRESSED AIR DRYER: 

1999 Ingersoll-Rand SSR-EP25SE Industrial Stationary Air Compressor, 95GFM Capacity, 25 HP Normal Drive Electric Motor, SN# KE6907U99133, 125psig Operating Pressure, Digital Display, Quiet Run Cap.

1996 Ingersoll-Rand SSR-EP25SE Industrial Stationary Air Compressor, 95GFM Capacity, 25 HP Normal Drive Electric Motor, SN# KE2427U96169, 125psig Operating Pressure, Digital Display, Quiet Run Cap.
2 HP Portable Air Compressor with Hose Reel.

1996 Ingersoll-Rand Model DXR100 Refrigerated Compressed Air Dryer, SN# 96HDXR4306, 130° Max Inlet Air Temperature, Single Phase, ½ HP Electric Compressed Motor, 16W HP Fan Motor.

PEDESTAL GRINDERS:

2 HP Industrial Pedestal Grinder on Stand with Seco Model UFO-90 Dust & Fires Collector on Stand.
Baldor 3/4HP Bench-Top Grinder on Stand.

AUTOMATED SHRINK WRAP SYSTEM:

ITW Mima “Cobra III” CNC Pallet Shrink Wrapping System, Digital Read-Out, Emergency Stop Switch, Accustretch Attachment, Electric Eye, 8’ Height Capacity.

COMMERCIAL FLOOR SWEEPER: 

Tennant Model 6080 Commercial Industrial Walk-Behind Sweeper, Electric Motor with On-Board Charger, (2) Front Sweeper Brushes, Forward & Reverse, 329 Actual Hours, Adjustable Height.

SHELVING, STORAGE, PARTS BINS: 

Approximately (100) HD Steel Stackable Storage/Scrap Bins; (24) HD Steel Scrap Bin Angle Frame Carts on Wheels; (16) Sections of Heavy Duty Interlake Steel Pallet Racking with (2) & (3) Shelves Each, Crushed Board Wood Bottom (8’Height x 8’ Spacing); (6) Sections of Heavy Duty Interlake Pallet Racking, 12’ Uprights, (4) Shelves Each; (48) 120x100x80cm Wire Collapsible Industrial Wire Storage Baskets; (47) 123x87x96cm Wire Collapsible Industrial Wire Storage Baskets; (2) Heavy Duty 6-Shelf Steel Shelf Units on Wheels; (33) Heavy Duty Stacking Steel Stands, 12” & 18”; (25) Heavy Duty 4-Shelf Steel Shelf Units; Approx. (100) Plastic Acro-Bin Container Bins; (240) Heavy Duty Fiberglass 6”x10”x4 ½” Parts Bins;

STEEL I-BEAMS & STEEL TUBING INVENTORY: 

(13) ½”x6”x10 ½”x32’ Long I-Beams, (3) that are 31’ Long; (4) ½”x6”x18”x31’4” Long I-Beams; Approx. (60) 20’ 1 ½” & 1 ¾” Diameter x 12 Gauge Sections of Tubing; (1) 5/32” x 2” Diameter x20’ Tube; Misc Copper Tubing; Heavy Duty Angle Iron; 3”x3” Square Tubing; 1 ½”x1 ½” Square Tubing; 1 ½”x2” Rectangle Tubing.

INDUSTRIAL CARDBOARD BALER: 

Industrial Hydraulic Cardboard Baler, 48” Stroke, Air Gate, Manual Binding, 4 ½” x 3 ½” Bales.

COLD CUT SAW:

Scotchman Semi-Auto Steel Cold Cut Saw, 2HP Electric Motor, (8) Extra Blades, Heavy Duty Cart, SN# 32541125, 4-Way Clamp Vise, Air Operated, Air Controlled Box.

ELECTRICAL POWER BOXES & SWITCHES:

Square D Electrical Power Boxes & Switches; Several Heavy Duty Electric Panels & Switches.

SHOP EQUIPMENT:

Brand New Victor Professional “Performer” Torch Set with Case; Harris Torch Set with Cart, Gauges, Torch & Hoses; Hypertherm Powermax 350 Portable Plasma Cutting System with Gun; Ridgid Heavy Duty Industrial 6” Electric Jointer; Wilton Model M60 Industrial Pedestal Drill Press, 4,800 RPM, High Speed, 4-Way Heavy Duty Vise, Manual Down Pressure, ¾ HP Electric Motor; (3) Dayton 17” Industrial Pedestal Drill Presses, ¾ HP Electric Motors, (1) with Air Up & Down Pressure, (2) with Manual Up & Down Pressure, (1) Manual one with Foot Control; Ryobi 10” Bench-top Table Saw with Metal Stand; (4) Lift-All 11,500lb. Nylon Slings, 8’x 4”, 23,000lb Basket Capacity, 9,200lb Choker Capacity, 11,500lb. Vertical Capacity; (2) Rolift 5,000lb Hydraulic Pallet Jacks; Heat Bust 48” Electric Shop Fan on Wheels; (6) Lasko Heavy Duty Pedestal Shop Fans;; Devil Biss 5HP 20 Gallon Portable Air Compressor; Small Wall-Mount Shop Vac; (2) Greenley Sewer Snakes; A.W. Sperry DSA-400 Digital Voltage Meter; Dayton 6 Amp Portable Battery Charger 6 & 12V; Lots of Various Power Cords; Central Hydraulics 3-Ton Hydraulic Floor Jack (Like New); 5-Rod Heavy Duty Electrical Wire Cart; Heavy Duty 4-Wheel Hose Cart; (2) Jet Bench-top Arbor Press, 1-Ton; (2) 4-Wheel Steel Lift Carts with Air Cylinders on Wheels; Summit Portable Metal Band Saw; Luxor Portable Shop Cart on Wheels with Power Strip Cord; Justrite Flammable Liquid Storage Cabinet with lock; Heavy Duty 2-Wheel Cart; (2) Justrite 80 Gallon Spill Containment Caddies; (2) Heavy Duty Electric Heat Lamps with Clamp-type Holders; Small Portable Air Tank; Schumacher 200 Amp Portable Battery Charger with Boost; Stanley Portable Steel Banding Car with Tools; Goodway Model VAC2 Commercial Stainless Steel Wet/Dry Shop Vac; Rubbermaid Heavy Duty Plastic Shop Service Cart on Wheels with Lower Shelf; Ridgid Heavy Duty Steel Chop Saw; Heavy Duty 2-Wheel Cart; Keller 6’ Fiberglass Step Ladder; (2) Metal 4-Wheel Shop Carts with Lower Shelves; Heavy Duty Steel Welding Bench on Cart, Air-Seal Exhaust System with Filter Housing, Both on Heavy Duty Casters; Heavy Duty 4’x4’ Steel Welding Table on Heavy Duty Casters;
(2) Champ Digital Platform Scales, Model CD31, with Stands & Digital Readout;

PORTABLE CONVEYORS: 

(2) Nestaflex Model 275 Adjustable Height Collapsible Roller Conveyors on Wheels, 7” Adjustable Height; Hundreds of Feet of Chain-type Roller Conveyor; (2) Roach Heavy Duty 10’ Roller Conveyor Sections;

POWER HAND TOOLS:

Central Pneumatic ¾” Heavy Duty Impact Wrench, Twin Hammer; Huskee 3/8” Air Impact; Several Metal Whole Saws; Ingersoll-Rand Air Chisel; Milwaukee Electric Heat Gun; Abrady ID Pro Plus Computerized Hand Held Wire Marker Printer; Dymo Hand Held Wire Marker Printer; Porter Cable Heavy Duty Electric Drill, Reversible; Drill Doctor Electric Drill Bit Sharpener with Case; Porter Cable Heavy Duty Electric Hand Saw with Case; Milwaukee Cordless Driver Drill & Flashlight Combo Set with Case; Ryobi ¼” Electric Sheet Sander with Case; 1000 Piece Solderless Electric Terminal Set with Case; Central Pneumatics 3/8” Air Impact; Milwaukee Whole Saw with Case; OIT 10-Ton Hydraulic Porta Power with Case; Porter Cable Electric Steel Chop Saw; Harper 2-Wheel Medium Size Torch Set on Cart; Grease Guns; Vise-Grip “Quick-Grip” Pipe Clamps; Makita Electric 4 ½” Angle Grinder.

HAND TOOLS:

Hand Tubing Benders; Several Hand Wire Stripers; Set of T-Handle Allen Wrenches; Wrench & Screwdriver Sets; Vise Grip Welding Clamps; Posilock Heavy Duty Industrial 3-Jaw Gear & Bearing Puller; Heavy Duty 2-Jaw Heavy Duty Industrial 3-Jaw Gear & Bearing Puller; (4) 3-Jaw Gear Pullers (Various Sizes); Greenley Knock-out Punch Set, Model 735BB; Roper Whitney #5 Junior Hand Punch with Dies & Case; Few Small Levels; Ridgid Small Hand-held Tubing Bender; Ridgid “Rapid Grip” Pipe Wrench; (2) 150lb. Torch Wrenches; Deep Well & Standard ½” Drive Sockets; Tons of Tape Dispensers, Hammers, Screwdrivers, Yankee Screwdrivers, Hand Tools; Vise Grip Welding Clamps, Various Air Tools; ISM Air Box Stapler; TEW Electric Impulse Sealer.

NEW HARDWARE & HOSE REEL PARTS:

Large Assortment of New Bolts, Locking Nuts, Brass Air Quick Chucks, Flat Washers, Split Rings, Retaining Rings; Hundreds of Metal Bushings; Approx. (200) 12”x3/4” Harden Bolts with Lock Nuts; Huge Assortment of Brass Air Line Fittings; Hundreds of Pounds of New Bolt, Nut & Fastener Inventory; Approx. 2,400 Heavy Duty Plastic Reel Handles; 150’ 5/8” Black Garden Hose (Brand New); Approx. (30) Steel Wall-Mount Reel Holders; (20) Heavy Duty Air Hoses with Quick Couplers; (500) Heavy Duty Plastic Handle Grips (Black 1 ½” x4 ½”); Large Assortment of Clear Plastic Tubing; Several Wall-Mount & Free Standing Air Hose Reels; Approx. (90) Brand New Pneumatic Utility Tires; (2) New Rolls of ½” Air Hose & (2) Partial Rolls of Brand New Torch Double Hose.
INDUSTRIAL OVEN:
Vulcan 2,000° Industrial Oven, Model A550, Quenchall Oil Included;

BRAND NEW CARBOARD BOX INVENTORY:

(560) 10 ½”x19 ¼”17 ¼”
(255) 19 ½”x19”x30”
(240) 18 ¾”x8 7/8”x18 ¾”
(65) 31 ½”x19 ½”x16 ½”
(Approx. 85) 22 ½”x22 ¼”x21
(90) 30”x15 ½”x35 ½”

DIRECT LOGIC CONTROL BOARDS & NEW INVENTORY:

Several Direct Logic Control Panels; (270) Running Feet of I-Line Aluminum Plug-in Duct, 400 Amp Capacity; Glufast Model 32in Colonel Solid Brass Adhesive Applicator, SN# 1194-32/258C; Large Assortment of Tin Duct Work; GE 75KVA Electric Transformer, 3-Phase, 60 Hz, 40C Ambient, 150c Rise, 220c System, Primary 480V Line to Line, Secondary 208V Line to Line, 120V Line to Neutral; Several Heavy Duty Plastic Totes; (4) Rapid Reel Wall-Mount Garden Hose Reels & (1) Free-Standing Hose Reel (New in Box); (2) Brand New Utilitub Combo Laundry Sinks, 20”w with Tub Lid; Approx. (30) New Pair of Welding Gloves; Several Air Cylinders; Brand New NCI Exterior 400W Security Light; Several Heavy Duty Motors (Up to 15HP & 1440RPM); Approx. (60) 3’x5’ Sheets of 12 Gauge Steel; (8) 4’ Fluorescent Light Fixtures; (3) Rubbermaid & Brute Commercial Mop Buckets.

OFFICE EQUIPMENT & FURNITURE: 

12’ 2-Pedestal Executive Conference Table w/(10) Executive Adjustable Office Chairs on Wheels (Like New); (9) L-Shaped Executive Office Desks; Various Adjustable Executive Office Chairs on Wheels; Overstuffed Guest Office Chairs; (16) Chromecraft Stacking Break Room Chairs w/(4) 3’ x 3’ Chromecraft Tables w/Laminated Tops; (4) Jepsteel 4-Drawer Steel Tub Files; Several Small 3-Drawer Metal “Under Desk” File Cabinets on Wheels; More.

AUCTIONEERS NOTE: Make Plans now to attend this Super Clean Manufacturing Company Business Liquidation Auction. Eley Corporation is closing their manufacturing facility in Lincoln, Nebraska and are offering their super clean line of Equipment for you to buy and Absolute Public Auction! The Care and Maintenance of their Equipment is Exemplary and you will Truly be Impressed! For More Information, Pictures or a Brochure, Please Contact the Auction Company or visit the web at www.nitzauctions.com. 7% Buyer’s Premium Applies. Previous Inspections on Thursday, January 7, 2010 from 9:00 AM to 5:00 PM and Auction Day only Please. Lunch & Restrooms on Grounds.

ELEY CORPORATION